The modular, universal XIOS controller presents an entirely new generation of ECU. It consists of a high-performance main board with high CPU power, large DRAM and FLASH memory. A FPGA logic chip leaves more computing power to the CPU for PLC functions or processor-intensive control tasks. Additional I/O boards can be attached to the main board in different number and type. They are configurable by software, jumperless and small in size. 
XIOS enables customers to develop their own control functions based on CoDeSys (IEC 61131-3) or MATLAB™*/Simulink. It is applicable for alarm and monitoring purposes just as well. 

• 32 Bit 264 MHz processor
• Communication interfaces Ethernet, CAN, USB, RS232, RS485
• optional 4.3" display
• Protection grade IP00 or IP6K9K
• Power supply: 9...32 VDC

Combustion engines
Turbines
Gensets

ADG-T
ADG-TT

The variable ADG digital steam turbine controllers are part of the Si-TEC product range developed and produced by HEINZMANN Australia. Retaining the precision and performance in governing control the Si-TEC Xtend ADG also includes additional functions, features as well as communications for optimum performance.

• Precise speed governing typically within 0.1% of operating speed at steady state
• Dual MPU (or Prox.) speed sensors for redundancy
• Wide range of actuator drivers available
• Auto run up and warm through
• Interpolating multiple speed PIDs
• Process control
• Single turbine variable speed governing control referenced from internal or external set points
• Single turbine constant speed governing control referenced from internal set points
• Multiple engines driving a common shaft (tandem)
• Controlled test of over speed protection
• Extensive alarm functions
• On board diagnostic
• Dedicated RS485 MODBUS® Port for customer PLC/DCS interface
• Compatible with all Si-TEC rupport PC software
• Tandem turbines system available (ADG-TT)
• Actuator drivers available

Steam Turbines:

• Sugar mills
• Paper mills
• Oil and gas
• Refineries
• Petro chemical

 
For steam turbine mechanical drives including:

• Pumps
• Blowers
• Fans
• Shredders
• Mills
• Compressors
• Marine Vessels

Viking35

ECU with large range of I/O's for most diverse and complex control and monitoring tasks

Operated in conjunction with the range of hydraulic actuators by Regulateurs Europa

• Protection grade IP00
• Power supply: 24 VDC

Diesel engines
Dual Fuel Engines
Turbines

Marine
Rail Traction
Gensets

DC 1-03

DC 1-04

Operating as part of PRIAMOS governor systems together with HEINZMANN rotary actuators with gearing
DC 1-04 driving up to 2 actuators

• Power supply: 24 VDC
• Protection grade IP55
• Marine certified >> view certificates

PRIAMOS I governor for engines < 5 MW
combination of DC 1-03 and actuators StG 16/30/40

PRIAMOS II governor for engines < 10 MW
combination of DC 1-03 and actuators StG 64/90

PRIAMOS III governor for engines < 15 MW
combination of DC 1-04 and actuator StG 180

Diesel engines
Gas Engines
Gas Turbines
Steam Turbines

Gensets
Pump drives
Vessels
Heavy-duty vehicles

DC 2-02

Operating as part of HELENOS governor systems together with direct acting rotary actuators

• Power supply: 24 VDC
• Protection grade IP55 or IP00
• Marine certified
• Explosive atmospheres certified
  >> view certificates

HELENOS I governor for engines < 1 MW
combination of DC 2-02 and actuators StG 6/10

HELENOS III governor for engines < 4 MW
combination of DC 2-02 and actuators StG 16/30/40

HELENOS IV governor for engines < 800 kW
combination of DC 2-02 and actuators BOSCH EDC

HELENOS V governor for engines 80 kW-120 kW
combination of DC 2-02 and actuators StG 2005DP / 2040 DP

Diesel engines
Gas Engines
Gas Turbines
Steam Turbines

Gensets
Pump drives
Marine
Rail Traction
Heavy-duty vehicles

DC 6

Operating as part of most powerful PANDAROS governors together with any type of HEINZMANN actuator up to 30 Nm torque

• Power supply: 24 VDC, 12 VDC
• Protection grade IP55 or IP00
• Marine certified
• Explosive atmospheres certified
  >> view certificates

PANDAROS I governor for engines < 1 MW
combination of DC 6 and actuators StG 6/10

PANDAROS II governor for engines < 2 MW
combination of DC 6 and actuators StG 2005, StG 2010/2040/2080

PANDAROS III governor for engines < 3 MW
combination of DC 6 and actuators StG 16/30

PANDAROS IV governor for engines  80 kW-120 kW
combination of DC 6 and actuators StG 2005DP / 2040 DP

Twin-PANDAROS: extended version for control of 2 actuators

Diesel engines
Gas Engines

Gensets
Pump drives
Marine
Heavy-duty vehicles

Low current version of DC 6, combined with small actuators requiring drive currents up to 200mA, suitable for proportional electro-mechanical actuators, operating as positioner

• Power supply: 12 VDC, 24 VDC
• Protection grade IP00

Gas turbines
Steam turbines
Water turbines

Gensets
Heat Pumps

Operating as part of speed governor system together with actuators StG 2010/2040/2080
Positioner capability and power management function, applicable as peripheral module to extend I/O abilites of main control unit and to drive another actuator
Version for marine propulsion engines available with output 0-1 A, driving the range of RE hydraulic actuators

• Power supply: 24 VDC
• Protection grade IP00
• Galvanically insulated CAN bus interface
• Marine certified

Diesel engines
Gas Engines
Turbines

Gensets
Marine
Heavy-duty vehicles

Economic controller with competitive price-performance ratio, operating as a part of ORION governor systems together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 and linear actuator series

• Power supply: 12 VDC, 24 VDC
• Protection grade IP00
• Without classification

Economic controller for direct engine mounting with competitive price-performance ratio, operating as a part of ORION governor systems together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 in 2Q-operation and linear actuator series

• Power supply: 9...30 VDC
• Protection grade IP6K9K

DC 12

Economic controller for direct engine mounting with competitive price-performance ratio, operating as a part of ORION governor systems, driving direct acting rotary StG 3005/3010, StG 2005 DP/2040 DP, StG 4002 actuators in 4Q-operation

• Power supply: 7...32 VDC
• Protection grade IP6K9K

Diesel engines
Gas Engines

Gensets
Heavy-duty vehicles